Best Buy Steel - Discount Steel

Products
- PATIO TUBE AND ASSOCIATED
  - PATIO TUBE
    - GALVANISED
    - POWDER COATED
      - 76 X 38
      - 2MM SHS
      - 2MM RHS
  - PATIO ANGLE
  - BACK CHANNEL
- TUBE AND PIPE
  - SQUARE HOLLOW SECTION
    - GALVANISED
    - BLUE PAINTED/PRIMED
  - RECTANGULAR HOLLOW SECTION
    - GALVANISED
    - BLUE PAINTED/PRIMED
  - GALVANISED PIPE
  - BLACK PIPE
- ROOF AND WALL
  - ROOF AND WALL SHEETING
    - STEEL ROOF AND WALL SHEETING
    - FIBREGLASS SHEETING
    - POLYCARBONATE SHEETING
    - POLYCARBONATE TWINWALL
    - SHEETING ACCESSORIES
  - RAINWATER PRODUCTS
  - FRAMING AND PURLINS
  - ROOF FRAMING
  - DOOR FRAMES
- FLASHINGS AND PRESSINGS
  - STANDARD FLASHINGS
  - CUSTOM FLASHINGS
    - 0.55MM BMT COLORBOND
    - 0.55MM BMT ZINCALUME
    - 0.55MM BMT GALVANISED
    - 0.75MM BMT ZINCALUME
  - CUSTOM PRESSINGS
    - 1.00MM BMT GALVANISED
    - 1.15MM BMT GALVANISED
    - 1.15MM BMT ZINCALUME
    - 1.55MM BMT GALVANISED
    - 1.95MM BMT GALVANISED
    - 2.45MM BMT GALVANISED
    - 2.90MM BMT GALVANISED
- SERVICES
  - CUTTING
  - POWDER COATING
- STRUCTURAL
  - ANGLE AND BAR
  - HOT ROLLED STEEL
    - PFC
    - UB
    - UC
- FENCING AND GATES
  - COLORBOND FENCING PANELS
  - COLORBOND FENCING COMPONENTS
  - ALUMINIUM SLAT FENCING
  - CATTLE RAIL
- FLAT SHEET AND PLATE
- MESH
  - WELDMESH
- ACCESSORIES
  - BRACKETS
  - POST BASES
  - CAPS
  - PAINT
  - FASTENERS
    - COMMON FASTENERS
  - SLIDING DOOR HARDWARE
  - OTHER ACCESSORIES
- BARGAIN CORNER
Product Info
Downloads
About Us

PATIO TUBE AND ASSOCIATED
- PATIO TUBE
  - GALVANISED
  - POWDER COATED
    - 76 X 38
    - 2MM SHS
    - 2MM RHS
- PATIO ANGLE
- BACK CHANNEL
TUBE AND PIPE
- SQUARE HOLLOW SECTION
  - GALVANISED
  - BLUE PAINTED/PRIMED
- RECTANGULAR HOLLOW SECTION
  - GALVANISED
  - BLUE PAINTED/PRIMED
- GALVANISED PIPE
- BLACK PIPE
ROOF AND WALL
- ROOF AND WALL SHEETING
  - STEEL ROOF AND WALL SHEETING
  - FIBREGLASS SHEETING
  - POLYCARBONATE SHEETING
  - POLYCARBONATE TWINWALL
  - SHEETING ACCESSORIES
- RAINWATER PRODUCTS
- FRAMING AND PURLINS
- ROOF FRAMING
- DOOR FRAMES
FLASHINGS AND PRESSINGS
- STANDARD FLASHINGS
- CUSTOM FLASHINGS
  - 0.55MM BMT COLORBOND
  - 0.55MM BMT ZINCALUME
  - 0.55MM BMT GALVANISED
  - 0.75MM BMT ZINCALUME
- CUSTOM PRESSINGS
  - 1.00MM BMT GALVANISED
  - 1.15MM BMT GALVANISED
  - 1.15MM BMT ZINCALUME
  - 1.55MM BMT GALVANISED
  - 1.95MM BMT GALVANISED
  - 2.45MM BMT GALVANISED
  - 2.90MM BMT GALVANISED
SERVICES
- CUTTING
- POWDER COATING
STRUCTURAL
- ANGLE AND BAR
- HOT ROLLED STEEL
  - PFC
  - UB
  - UC
FENCING AND GATES
- COLORBOND FENCING PANELS
- COLORBOND FENCING COMPONENTS
- ALUMINIUM SLAT FENCING
- CATTLE RAIL
FLAT SHEET AND PLATE
MESH
- WELDMESH
ACCESSORIES
- BRACKETS
- POST BASES
- CAPS
- PAINT
- FASTENERS
  - COMMON FASTENERS
- SLIDING DOOR HARDWARE
- OTHER ACCESSORIES
BARGAIN CORNER

		Custom Flashing - 0.55mm BMT - 1000mm girth, 0-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 990mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $56.76/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 1-bend - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 994mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $58.37/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 2-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 982mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $59.95/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 3-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 983mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $61.56/m \| Quantity:
Top of Page
		Custom Flashing - 0.55mm BMT - 1000mm girth, 4-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 990mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $63.12/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 5-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 985mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $64.72/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 6-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 997mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $66.33/m \| Quantity:

		Custom Flashing - 0.55mm BMT - 1000mm girth, 7-bends - Zincalume Advance Order Only - Available Lead Time: 3 - 4 business days Custom Flashing made-to-order (you will need to send us drawings separately to your order). Girth is the sum of all dimensions when looking at a cross-section of the custom flashing. Pricing is based on material, thickness, girth and number of bends. Note: Prices here do not include custom flashings with tapers. Please contact us to calculate prices for tapered custom flashings. Girths are rounded up to the next highest stock girth (i.e. a 995mm girth custom flashing would be priced as a 1000mm girth custom flashing). Manufacturing/Transport Limitations: Channels must be wider than they are deep (contact us for clarification). Minimum distance between bends is normally at least 10mm. Closed shapes are not normally possible to make. All bends must be on the same axis (i.e. making a box or similar is not what we consider a custom flashing). We can make many custom flashings up to 8m long but 4-6m is a safer maximum in most cases (contact us to check what's possible/recommended) Cut to length: m Price: $67.91/m \| Quantity:
Top of Page